A500 Three-Color Light Inspection Quadcopter Uav
A500+XC20-
1. Autonomous flight: autonomous flight according to the ground station software plan (remote control can be used for emergency conditions).
2. Low voltage protection, can autonomously warn, return, and land.
3. Three-axis stabilization gimbal.
4. Matching ground station software, real-time monitoring of equipment working status.
5. Terrain-like flight function.
6. Equipped with laser ranging module, which can display target point coordinate information in real time.
7. Support ground station software online firmware upgrade.
8. Equipped with charging, transportation and storage integrated box.
9. Support single Beidou navigation.
10. Support RTK function, PPP satellite-based enhanced high-precision navigation.
11. Support software customization requirements.
12. Equipped with photo image data encryption function.
13. Equipped with wireless reading image data function.
-
Drone:
1. Endurance: 50±5 minutes (mounted with three-light pod).
2. Flight altitude: ≥5000 m.
3. Maximum control radius: 7km (visual clearance environment).
4. Maximum lifting speed: 4m/s for lifting and 3m/s for lowering.
5. Maximum cruising speed: 15m/s.
6. RTK accuracy: horizontal: 10mm+1ppm, vertical: 20mm+1ppm.
7. Communication frequency band: 2.4GHz.
Camera:
1. Visible light module
Photo 3840*2160, 8 million pixels, focal length 8mm.
Electronic zoom: 8x.
2. Thermal imaging module
Infrared resolution: 640*512, lens focal length: 13mm.
3. Laser ranging module
Range: 5-1200m, Range accuracy: ±1m, Range frequency: ≤4Hz.
Tilt measurement: ±90° (two directions), accuracy: <±1°.
Laser wavelength: 905nm. Laser divergence angle: ~6mrad. Transmitting aperture: Φ10x7.5mm. Receiving aperture: Φ15x10mm. Communication interface: UART (TTL-3.3).
Working temperature: -20~+60℃. Storage temperature: -30~+60℃.
Impact level: 800G.1ms. Power supply: DC3~5V. Power consumption: ≤1w. Baud rate: 115200.
Gimbal:
1. Three-axis stabilization.
2. Gimbal working mode: heading follow (default), heading lock.
3. Gimbal control mode: speed control.
4. Control range: pitch -135°~45°, heading ±60°, roll ±45°.